| Name | V650 | V855 | V1160 | V1270 | V1690 | V1890 | 单位 | ||
| Workbench | Table size | 1000×400 | 1000×550 | 1200×600 | 1360×700 | 1600×800 | 2000×900 | mm | |
| Allowable maximum load | 400 | 500 | 800 | 1000 | 1500 | 1600 | kg | ||
| T-slot size | 3-18-120 | 5-18-90 | 5-18-100 | 5-18-122 | 7-22-110 | 5-22-165 | mm | ||
Processing range | Maximum left and right travel-X axis | 650 | 800 | 1100 | 1200 | 1600 | 1800 | mm | |
| Maximum front and rear travel-Y axis | 400 | 550 | 650 | 700 | 900 | 900 | mm | ||
| Maximum up and down travel-Z axis | 550 | 550 | 650 | 600 | 700 | 600 | mm | ||
Distance from spindle end face to worktable | Max. | 650 | 670 | 770 | 687 | 850 | 715 | mm | |
| Minimum | 100 | 120 | 120 | 87 | 150 | 115 | mm | ||
| Distance from spindle center to Z-axis guide rail surface | 485 | 590 | 678 | 785 | 910 | 950 | mm | ||
| Spindle | Taper Hole (7:24) | BT40-120 | BT40-150 | BT 40 φ150 | BT 50 φ155 | BT 50 φ190 | BT 50 φ190 | ||
| Feed | Move fast | X Axis | 32 | 24/32 | 24 | 20 | 20 | 24 | m/min |
| Y Axis | 32 | 24/32 | 24 | 20 | 20 | 24 | |||
| Z Axis | 24 | 18/24 | 18 | 12 | 12 | 14 | |||
| Feed speed | 1-10000 | 1-10000 | 1-10000 | 1-10000 | 1-10000 | 1-10000 | mm/min | ||
| Tool magazine | Tool magazine form | Disc type | Disc type | Disc type | Disc type | Disc type | Disc type | ||
| Tool magazine capacity | 16 | 24 | 24 | 24 | 24 | 24 | |||
| Tool change time | 2.5 | 2.5 | 2.5 | 2.5 | 2.5 | 2.5 | s | ||
| Positioning accuracy | Accuracy testing standard | JISB6336-4：2000/ GB/T18400.4-2010 | JISB6336-4：2000/ GB/T18400.4-2010 | JISB6336-4：2000/ GB/T18400.4-2010 | JISB6336-4：2000/ GB/T18400.4-2010 | JISB6336-4：2000/ GB/T18400.4-2010 | JISB6336-4：2000/ GB/T18400.4-2010 | ||
| X/Y/Z axis | 0.008 | 0.008 | 0.008 | 0.008 | 0.008 | 0.008 | mm | ||
| X/Y/Z axis repeat positioning accuracy | 0.005 | 0.005 | 0.005 | 0.005 | 0.005 | 0.005 | mm | ||
| Dimensions (L×W×H) | 2270×1820×2590 | 2600×2380×2400 | 3300×2600×3360（Including balance cylinder） | 3400×2700×2670 | 4200×3262×3672（Including balance cylinder） | 4900×3440×3230 | mm | ||
| The gross weight of the machine tool is about (this weight is the reference value of high allocation, and the weight change caused by selection is subject to the actual value) | 3800 | 5300 | 6800 | 10000 | 12000 | 14000 | kg | ||
