| Name | W630 | W630S | W800 | W1000 | Unit | ||
| Workbench | Table size | 630*630（Okada/Sangin 630）/ 800*800(Shangjin630-800 | 630*630（Double exchange workbench） | 800*800 | 1000*1000 | mm | |
| Allowable maximum load | 1200 | 1200*2（Double exchange workbench） | 2000 | 3000 | kg | ||
| T-slot size | 5-18-100（Okada/Sangin 630）/ 7-18-100(Shangjin630-800) | 5-18-125（Double exchange workbench） | 7-22-100 | 5-22-160 | mm | ||
Processing range | Maximum left and right travel-X axis | 1050 | 1050 | 1300 | 2000 | mm | |
| Maximum front and rear travel-Y axis | 800 | 800 | 1150 | 1350 | mm | ||
| Maximum up and down travel-Z axis | 850 | 850 | 1000 | 1300 | mm | ||
Distance from spindle end face to worktable | 230-1080 | 256-1106（Double exchange workbench） | 250-1250 | 350-1650 | mm | ||
| Distance from spindle center to Z-axis guide rail surface | 145-945/140-940 | 0-800（Double exchange workbench） | 50-1200 | 0-1350 | mm | ||
| Spindle | Taper Hole (7:24) | BT 50 φ190 | BT 50 φ190 | BT 50 φ200 | BT 50 φ200 | ||
| Revolutions range | 6000 | 6000 | r/min | ||||
| Spindle motor power | 22 | kW | |||||
| Feed | Move fast | X Axis | 18 | 18 | 15 | 12 | m/min |
| Y Axis | 15 | 14 | 12 | 12 | |||
| Z Axis | 15 | 12 | 12 | 12 | |||
| Feed speed | 1-10000 | 1-10000 | 1-10000 | 1-10000 | mm/min | ||
| Tool magazine | Tool magazine form | Disc type | Disc type | Disc type | Disc type | ||
| Tool magazine capacity | 24 | 24 | 24 | 24 | |||
| Tool change time | 2.5 | 2.5 | 2.5 | 2.5 | s | ||
| Positioning accuracy | Accuracy testing standard | JISB6336-4：2000/ GB/T18400.4-2010 | JISB6336-4：2000/ GB/T18400.4-2010 | JISB6336-4：2000/ GB/T18400.4-2010 | JISB6336-4：2000/ GB/T18400.4-2010 | ||
| X/Y/Z axis | 0.008 | 0.008 | 0.008 | 0.008 | mm | ||
| X/Y/Z axis repeat positioning accuracy | 0.005 | 0.005 | 0.005 | 0.005 | mm | ||
| Dimensions (L×W×H) | 4100×3000×2550 | 5300×3330×2570 | 5800×3400×4500（Including balance cylinder） | mm | |||
| The gross weight of the machine tool is about (this weight is the reference value of high allocation, and the weight change caused by selection is subject to the actual value) | 10000 | 12000 | 14500 | 23000 | kg | ||
